BOSCH LTC 8561 Series Single-channel On-site Receiver/Drivers

BOSCH LTC 8561/50

BOSCH LTC 8561 Series Single-channel On-site Receiver/Drivers

BOSCH LTC 8561/50 BOSCH LTC 8561/60 BOSCH LTC 8564/20

BOSCH LTC 8566/50 BOSCH LTC 8566/60

Full-featured pan/tilt/zoom/aux control
Auto-pan/random pan
Bi-Phase or RS-232 data input
99 Pre-positions with tour capability
Pre-positions compatible with 360° continuous pan/tilt drives
Integral local test feature

SİSTEM ÖZELLİKLERİ
DÖKÜMANLAR / SERTİFİKALAR / YAZILIMLAR

Model No. Rated Voltage1 , Voltage Range , Pan/Tilt, Aux1, & Aux Supply

LTC 8561/602 120 VAC, 50/60 Hz , 100 to 130 , 120 VAC, 50/60 Hz

LTC 8566/603,5 120 VAC, 50/60 Hz , 100 to 130 , 24 VAC, 50/60 Hz

LTC 8566/504,5 230 VAC, 50/60 Hz , 198 to 264 , 24 VAC, 50/60 Hz

LTC 8561/502 230 VAC, 50/60 Hz , 198 to 264 , 230 VAC, 50/60 Hz

LTC 8564/202 24 VAC, 50/60 Hz , 20 to 28 , 24 VAC, 50/60 Hz

1. Power (all models): 15 W at rated voltage (not including pan/tilt).

2. Fuse protected at 2.0 A.

3. Fuse protected at 1.0 A.

4. Fuse protected at 0.4 A.

5. For the LTC 8566/60 and LTC 8566/50, the maximum total current output, including Pan/Tilt output, Auxiliary 1 output, and Auxiliary Supply output, is 2.0 A.

Pan/Tilt Output 4 function pan/tilt solid state drive with zero crossing turn-on; 1.0 A drive capability

Lens Output

For Zoom, Focus, and Motorized Iris 6 VDC or 12 VDC, 100 mA maximum

Variable Speed 6 VDC Setting 4 VDC to 8 VDC

Variable Speed 12 VDC Setting	8 VDC to 16 VDC
Auto-pan Auxiliary Output1	Solid state drive with zero crossing turn-on; 1.0 A drive capability
Auxiliary Output 2, 3, and 4	Relay contact rating 250 VAC, 5.0 A resistive, 0.25 hp
Pre-positions	99, with 4 functions each for use with 355° pan/tilt drivers or 82 with 5 functions each for use with continuous pan/tilt drivers. Pan/tilt positions sensed at 10-bit accuracy. Note that the maximum number of pre-positions available in the system is dependent on the type of control system employed. Refer to the applicable controller specification for exact pre-position capabilities.
Size(H x W x D)	295 x 241 x 165 mm (11.6 x 9.5 x 6.5 in.)
Weight	6.8 kg (15 lb)
Temperature
Operating	–40°C to 60°C (–40°F to 140°F)
Storage	–40°C to 70°C (–40°F to 158°F)
Humidity	0% to 95% relative, non-condensing
Vibration	3 g swept sine wave, 15 Hz to 2000 Hz
Shock	50 g, 11 ms, 1/2 sine
Enclosure Protection	NEMA-4X, IP66, Enclosure Type RJ 1008 HPL

Firma Profili

Özgür Sistem Yangın Güvenlik ve Bilişim Teknolojileri Ticaret Limited Şirketi; güvenlik otomasyon ve bilişim sistemleri konularındaki bilgi ve birikimini müşterilerine sunmak amacıyla 2002 yılında İstanbul’da kurulmuştur.

BOSCH LTC 8561 Series Single-channel On-site Receiver/Drivers

BOSCH LTC 8561/50

BOSCH LTC 8561 Series Single-channel On-site Receiver/Drivers

Firma Profili

Ürünler

Servis Destek

Bize Ulaşın

Model No.	Rated Voltage1 , Voltage Range , Pan/Tilt, Aux1, & Aux Supply
LTC 8561/602	120 VAC, 50/60 Hz , 100 to 130 , 120 VAC, 50/60 Hz
LTC 8566/603,5	120 VAC, 50/60 Hz , 100 to 130 , 24 VAC, 50/60 Hz
LTC 8566/504,5	230 VAC, 50/60 Hz , 198 to 264 , 24 VAC, 50/60 Hz
LTC 8561/502	230 VAC, 50/60 Hz , 198 to 264 , 230 VAC, 50/60 Hz
LTC 8564/202	24 VAC, 50/60 Hz , 20 to 28 , 24 VAC, 50/60 Hz
1. Power (all models): 15 W at rated voltage (not including pan/tilt).
2. Fuse protected at 2.0 A.
3. Fuse protected at 1.0 A.
4. Fuse protected at 0.4 A.
5. For the LTC 8566/60 and LTC 8566/50, the maximum total current output, including Pan/Tilt output, Auxiliary 1 output, and Auxiliary Supply output, is 2.0 A.
Pan/Tilt Output	4 function pan/tilt solid state drive with zero crossing turn-on; 1.0 A drive capability
Lens Output
For Zoom, Focus, and Motorized Iris	6 VDC or 12 VDC, 100 mA maximum
Variable Speed 6 VDC Setting	4 VDC to 8 VDC