BOSCH LTC 8900 Series Allegiant Matrix/Control Systems - Modular

Özgür Sistem
BOSCH LTC 8901/50

BOSCH LTC 8900 Series Allegiant Matrix/Control Systems - Modular

BOSCH LTC 8901/50

  • 4096 Camera by 512 monitor switching
  • Modular construction
  • Powerful alarm handling capabilities
  • SalvoSwitching and SatelliteSwitch capability
  • Includes Windows-based configuration software
  • Two-digit site plus 4-digit camera ID mode
  • Includes system controller PC and LCD monitor
  •                                              Preloaded programming and diagnostic software
  •                                              Dual/redundant CPU/power supply

Capacities  
Video Inputs  
Standard 4096
Satellite Configuration 6144
Video Outputs 512
Keyboards 120
Alarm Inputs 1024
Receiver/Drivers  
Standard 4096
Satellite Configuration 6144
Input Voltage Level 0.5 Vp-p to 2 Vp-p (composite negative sync)
Gain Unity ± 2% (75 Ohm terminated)
Pulse/Bar Ratios1 Min. , Nom. , Max.
94% 98% , 106%
2T Pulse K Factor1 Min. , Nom. , Max.

0.2% 2.5%
Bar Amplitude (IRE) 1 Min. , Nom. , Max.
96 98 , 104
Sync Amplitude (% Bar) 1 Min. , Nom. , Max.
36% 39% , 44%
Field Time Waveform Distortion1 2% maximum
Line Time Waveform Distortion1 1% maximum
Short Time Waveform Distortion1 2% maximum
Long Time Waveform Distortion1 0.8% maximum
Video Bandwidth (-3 dB) 17 MHz
Frequency Response ± 0.5 dB to 11 MHz
Signal-to-Noise-Ratio1 70 dB at 3.58 MHz unified unweighted minimum
Crosstalk (at 3.58 MHz) Typical: –65 dB, Adjacent channel: –45 dB (typical)
Hum 60 dB below the composite 1 Vp-p video signal from 60 Hz to 6 MHz
Differential Gain1 Min. , Nom. , Max.

0.6% 2%
Differential Phase1 Min. , Nom. , Max.
0.6° 1.3°
Chrominance Luminance Gain Min. , Nom. , Max.
94% 100% , 109%
Chrominance Luminance Delay1 Min. , Nom. , Max.
–33 ns +3 ns , +33 ns
Luminance Nonlinearity1 Min. , Nom. , Max.
0.3% 4%
Switching Crosspoint matrix
DC Output 0 V
Transient Protection (VIM Cards) 350 W Peak Pulse Power(tp = 8/20 µs
1 Meets EIA/TIA - 250C Medium Haul Standard for 1024 cameras x 64 monitors.  
Temperature  
Operating 4°C to 50°C (40°F to 122°F)

Storage –40°C to 60°C (–40°F to 140°F)
Altitude 4500 m (15,000 ft)
Humidity 0 to 95 % relative, non-condensing
Vibration 3 g swept sine wave, 15 Hz to 2000 Hz
Shock 50 g, 11 m/s, ½ sine wave
The LTC 8904/60 and LTC 8904/50 include the equipment rack, LTC 8910/01 microprocessor module, LTC 8905/90 power supply, and LTC 8917/00 relay module.  
Model No. Rated Voltage , Voltage Range , NominalPower2
LTC 8904/60 120 VAC, 50/60 Hz , 100 to 140 , 30 W
LTC 8904/50 220–240 VAC, 50/60 Hz , 198 to 264 , 30 W
2 Power at rated voltage fully loaded.  
Connectors  
Controller Port 9-pin D-type RS-232 port for an external PC or computing device (default = 115,200 baud)
Console 9-pin D-type RS-232 port for an external computer or a computing device (default = 19,200 baud)
Alarm 9-pin D-type RS-232 port for an Allegiant alarm accessory unit (default = 19,200 baud)
Bi-Phase 9-pin D-type TTL level, high-speed control data output (BiPhase) for interface to an Allegiant series signal distribution units (data clock rate = 31.25 kHz)

COM Ports Two 9-pin D-type RS-485 ports for an external Allegiant accessory use
Keyboards Eight (8), 6-pin RS-485 ports for an Allegiant keyboard use (default = 9600 baud)
LAN RJ-45 high-speed LAN port for interface to LTC 8902 Series and LTC 8903 Series bays via LTC 8946 Series LAN switches
Equipment Rack  
Dimensions(W x D x H) EIA 48 cm (19 in.) rack,440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
Weight 7.2 kg (15.85 lb)
Construction Metal case with plastic panel
Finish Charcoal
Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
Weight 0.5 kg (1.1 lb)
   
Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
Front Panel Indicators Power, CPU activity
The LTC 8901/60 and LTC 8901/50 include the equipment rack, dual LTC 8910/01 microprocessor modules, dual LTC 8905/90 power supplies, and one LTC 8917/00 relay module.  
Model No. Rated Voltage , Voltage Range , NominalPower3

LTC 8901/60 120 VAC, 50/60 Hz , 100 to 140 , 30 W
LTC 8901/50 220–240 VAC, 50/60 Hz , 198 to 264 , 30 W
3 Power at rated voltage fully loaded.  
Connectors  
Controller Ports Two (2), RS-232 ports for an LTC 8943 PC controller interface (default = 115,200 baud)
Console RS-232 port for an external computer or a computing device (default = 19,200 baud)
Alarm RS-232 port for an Allegiant alarm accessory unit (default = 19,200 baud)
Switch Ctrl Digital interface port for the LTC 8943 PC controller
Bi-Phase TTL level, hi-speed control data output (Bi-Phase) for interface to an Allegiant series signal distribution units(data clock rate = 31.25 kHz)
COM Ports Two (2), RS-485 port for an external Allegiant accessory use
Keyboards Eight (8), 6-pin RS-485 ports for an Allegiant keyboard use (default = 9600 baud)
LAN Two RJ-45 high-speed LAN ports for interface to LTC 8902 Series and LTC 8903 Series bays via LTC 8944 Series and LTC 8945 Series LAN Switches
Equipment Rack  
Dimensions(W x D x H) EIA 48 cm (19 in.) rack,440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
Weight 8 kg (17.6 lb)

Construction Metal case with plastic panel
Finish Charcoal
Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
Weight 0.5 kg (1.1 lb)
   
Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
Front Panel Indicators  
LTC 8901Primary power Primary faultBack-up powerBack-up faultPrimary CPU in-useController activityBack-up CPU in-useAuto-select modePrimary CPU activityFault buzzerBack-up CPU activityLTC 8904PowerCPU Activity  
Rear Panel Indicators  
Relay outputs4Primary CPU faultBack-up power supply failureBack-up CPU fault Any failurePrimary power supply failure  
4 Relay Contacts: 24 VAC, 40 V peak, 1 A.  
The LTC 8902/60 and LTC 8902/50 include the equipment rack, LTC 8916/01 data receiver module, and LTC 8906 Series power supply.  
Model No. Rated Voltage , Voltage Range , Nominal Power5
LTC 8902/60 120 VAC, 50/60 Hz , 100 to 140 , 160 W
LTC 8902/50 220–240 VAC, 50/60 Hz , 198 to 264 , 160 W

5 Power at rated voltage fully loaded.  
Connectors  
Video Outputs Four (4), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
Video Bus Connections Sixteen (16), 34-pin ribbon connectors interconnect with LTC 8903 Series Camera Input bays using LTC 8809/00 ribbon cables
Console Port reserved for future use
COM 1 Port reserved for future use
COM 2 Port reserved for future use
EXT Sync BNC input used to synchronize the unit to an external sync signal. Accepts composite video, composite sync, or the V Sync output provided from another LTC 8900 Series matrix bay
V Sync BNC connector provides an output signal to synchronize an additional LTC 8900 Series matrix bay via its EXT Sync input
External Data Interface Two (2), RJ-45 high-speed LAN ports for interface to the LTC 8901 Main CPU bay via system LAN Switches. (Connected in parallel; one is used, one is reserved for future use)
Equipment Rack  
Dimensions(W x D x H) EIA 48 cm (19 in.) rack,483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 11.1 kg (24.5 lb)
Construction Metal cabinet
Finish Charcoal

Dimensions(W x D x H) EIA 48 cm (19 in.) rack,483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 0.5 kg (1.1 lb)
Dimensions(W x D x H) 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight 5.2 kg (11.5 lb)
Indicators Power On/Off and fuse alert LEDs
The LTC 8903/60 and LTC 8903/50 include the equipment rack, LTC 8918/01 data receiver module, and LTC 8805 Series power supply.  
Model No. Rated Voltage , Voltage Range , Nominal Power6
LTC 8903/60 120 VAC, 50/60 Hz , 100 to 140 , 85 W
LTC 8903/50 220–240 VAC, 50/60 Hz , 198 to 264 , 85 W
6 Power at rated voltage fully loaded.  
Connectors  
Video Inputs Sixteen (16), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
Looping Video Input Connections Sixteen (16), 34-pin ribbon connectors used with LTC 8809/00 ribbon cables (supplied as required to loop to additional LTC 8903 Series bays)
Video Bus Connections Four (4), 34-pin ribbon connectors interconnect with LTC 8903 Series camera input bays using LTC 8809/00 ribbon cables
Console Port reserved for future use

COM 1 Port reserved for future use
COM 2 Port reserved for future use
EXT SYNC BNC input used to synchronize unit to external sync signal; accepts composite video, composite sync, or the V Sync output provided from another LTC 8900 Series matrix bay
V SYNC BNC connector provides output signal to synchronize an additional LTC 8900 Series matrix bay via its EXT Sync input
External Data Interface Two (2), RJ-45 high-speed LAN ports for interface to LTC 8901 main CPU bay via system LAN Switches (Connected in parallel; one is used, one is reserved for future use)
Equipment Rack  
Dimensions(W x D x H) EIA 48 cm (19 in.) rack,483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 11.1 kg (24.5 lb)
Construction Metal cabinet
Finish Charcoal
Dimensions(W x D x H) EIA 48 cm (19 in.) rack,483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight 0.5 kg (1.1 lb)
Size(W x D x H) 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight 5.2 kg (11.5 lb)
Indicators Power On/Off and fuse alert LEDs

Use up to sixteen per LTC 8903 Series camera input bays.  
Camera Inputs 32
Size(D x H) 300 x 250 mm (11.8 x 9.8 in.)
Weight 0.41 kg (0.9 lb)
Use up to eight per LTC 8902 Series monitor output bays.  
Monitor Outputs 8
Dimensions(D x H) 300 x 250 mm (11.8 x 9.8 in.)
Weight 0.41 kg (0.9 lb)
(Redundant System Configurations Only)  
Includes LTC 8943/94 PC, LTC 8944/93 Primary LAN Switch and LTC 8945/93 Backup LAN Switch  
LTC 8943/94 PC Rack-mount industrial-grade Pentium PC, 512 MB RAM (minimum), 8 GB solid state hard drive (minimum), CD-/DVD burner, floppy drive, keyboard, mouse, keyboard/mouse rack-mount shelf, and Windows XP Professional; 120/230 VAC, 50/60 Hz
LTC 8059/00 Allegiant Master Control software (installed on PC)
Monitor(UML-191-90) 48.3 cm (19 in.) LCD panel120/230 VAC, 50/60 Hz
Monitor Rack(UMM-LCDUB-RM) Racked Height: 37.4 cm (14.7 in.)Racked Width: 48.3 cm (19.0 in.)
LTC 8944/93 Primary LAN Switch 24-port 10/100Base-T Ethernet Switch with SNMP Module, programmed with primary IP Address; 120/220 VAC, 50/60 Hz

LTC 8945/93 Back-Up LAN Switch 24-port 10/100Base-T Ethernet Switch with SNMP Module, programmed with back-up IP Address; 120/220 VAC, 50/60 Hz
24-port 10/100BaseT Ethernet Switch, no SNMP module; 120/220 VAC, 50/60 Hz  
The LTC 8808/00 assembly contains an interconnect panel which is used to convert 32 BNC connectors into two 16-channel ribbon cable connectors. The two (2) coaxial ribbon cables (LTC 8809/00), designed especially for use with video signals, and are then used to interconnect the video between the panel and the LTC 8900 system. Use of the LTC 8808/00 assemblies are required for all external video input and output connections. In addition to being used for video inputs and monitor outputs, the LTC 8808/00 assembly is also used to provide looping capability. One (1) LTC 8808/00 (includes panel and two ribbon cables) is required for each group of 32 system cameras or 32 monitors.  
Dimensions (W x D x H) EIA 48 cm (19 in.) rack,483 x 42 x 44 mm (19 x 1.65 x 1.75 in.)
Weight  
Panel 0.54 kg (1.2 lb)
Ribbon Cables Two (2), 0.3 kg (0.7 lb)
Construction Metal
Finish Charcoal
The LTC 8900 Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboard extension kits, Allegiant Bilinx Data Interface unit, receiver/driver units, switcher/followers, code merger units, video ribbon cables, and keyboard expansion units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. See the Allegiant Accessories datasheet.

Firma Profili

Özgür Sistem Yangın Güvenlik ve Bilişim Teknolojileri Ticaret Limited Şirketi; güvenlik otomasyon ve bilişim sistemleri konularındaki bilgi ve birikimini müşterilerine sunmak amacıyla 2002 yılında İstanbul’da kurulmuştur.

Ürünler

Servis Destek

Bize Ulaşın

© 2018 Özgür Sistem. All Rights Reserved.
Designed By EVA Web yazılım